Your numbers
Quick answer
What does the Screen pixel density calculate?
What pixel density follows from resolution and diagonal size? This calculator uses horizontal resolution, vertical resolution, and screen diagonal to estimate pixels per inch immediately in your browser.
With the values currently entered, the result is 108.8 PPI — pixel density. It also shows total pixels, and pixel pitch.
How to use the Screen pixel density
- Replace the example values with your own numbers.
- Review the result and supporting figures as they update automatically.
- Check the formula and assumptions before using the estimate for a decision.
Inputs used
- Horizontal resolution — entered in px
- Vertical resolution — entered in px
- Screen diagonal — entered in in
Screen pixel density formula
Square root of horizontal² + vertical² ÷ diagonal inches
Assumptions
- Resolution is the panel’s physical pixel grid.
- Diagonal size excludes the bezel.
Practical guide
Screen pixel density example and edge cases
What pixel density follows from resolution and diagonal size? Let's use a concrete example, then look at the assumptions that can move the answer.
Example: A practical screen pixel density scenario
For this example, use horizontal resolution of 2,560 px, vertical resolution of 1,440 px, and screen diagonal of 27 in. These are starting values, so replace them with numbers that match your situation.
- Horizontal resolution
- 2,560 px
- Vertical resolution
- 1,440 px
- Screen diagonal
- 27 in
Calculated result108.8 PPIpixel density
Start with pixel density. Then check total pixels, and pixel pitch to understand what sits behind the main result.
Example results use the default display profile. The calculator above follows your selected country and units.
How to read the result
- Read the main result first. The supporting figures for total pixels, and pixel pitch explain how the estimate is built.
- The method is Square root of horizontal² + vertical² ÷ diagonal inches. Keep the units consistent and use values from the same time period.
Edge cases worth checking
When horizontal resolution is unusual
Resolution is the panel’s physical pixel grid. Double-check this input before relying on the result.
When screen diagonal is uncertain
Diagonal size excludes the bezel. Run a lower and higher value to see a useful range.
What changes the result most
Horizontal resolution
Change horizontal resolution on its own first. This shows how strongly it affects the answer.
Vertical resolution
Change vertical resolution on its own first. This shows how strongly it affects the answer.
Screen diagonal
Measure screen diagonal with the same unit shown beside the input. Convert first if your source uses another unit.
Try a different scenario
Small changes show whether the answer is stable or sensitive.
Horizontal resolution: 10% lower
2,304 px100.6 PPIpixel density
Horizontal resolution: 10% higher
2,816 px117.1 PPIpixel density
Vertical resolution: 10% higher
1,584 px111.5 PPIpixel density
Common mistakes
Check horizontal resolution
Resolution is the panel’s physical pixel grid. Make sure this matches the number you enter.
Keep screen diagonal consistent
Diagonal size excludes the bezel. Use the same units and time period throughout the calculation.
Do not rely on one screen pixel density scenario
Run a cautious case and an optimistic case. The range is often more useful than one exact-looking number.
Use this result well
What pixel density follows from resolution and diagonal size?
Real speed, compression, battery health, and device overhead can change the result.